Heat-Resistant Alloys

Number	Ni	Cr	Fe	Mo	Mn	Al	Ni+Co	Ti	Nb+Ta	co	cu	W
HASTELLOY® alloy X (HX)	rem	20.5-23%	17-20%	8-10%	...	...	...	....	...	...	...	...
HAYNES® alloy 25 (L605)	9-11%	19-21%	3%max	...	2%max	...	...	....	...	rem(50%),	...	14-16%
HAYNES® Alloy 230	20-24%	...	...	1-3%	0.3-1%	...	...	....	...	max. 5%,	...	13-15%
INCOLOY® alloy 800	30-35%	19-23%	39.5% min	...	...	...	...	....	...	...	...	...
INCOLOY® alloy 800H & 800HT	...	...	...	...	...	...	...	....	...	...	...	...
INCOLOY® alloy 825	38-46%,	19.5-23.5%	22% min	2.5-3.5%,	...	...	...	....	...	...	1.5-3%	...
INCONEL® alloy 600	72% min	14.0-17.0%	6.0-10.0%	...	...	...	...	....	...	...	...	...
INCONEL® alloy 601	58.0-63.0%	21.0-25.0%	rem	...	...	1.0-1.7%	...	....	...	...	...	...
INCONEL® alloy 617	44.5% min	20.0-24.0%	3% max	8-10%	...	...	...	....	...	10-15%,	...	...
INCONEL® alloy 625	61%	21.5%,	...	9%	...	...	...	....	3.6%	...	...	...
INCONEL® alloy 718	52.5%	19%	18.5%	3.0%	...	...	...	....	3.6%	...	...	...
INCONEL® alloy X-750	...	14-17%	5-9%	...	...	...	70% min	2.25-2.75%	...	...	...	...
Kanthal-D®	...	22%	bal.	...	...	4.8 %	...	....	...	...	...	...
Nichrome V	rem(80%	19-21%	1% max	...	2.5% max	...	...	....	...	...	...	...
Nichrome 60-16	57% min	14-18%	rem	...	1% max	...	...	....	...	...	...	...
Nichrome 35-20	34-37% min	18-21%	rem	...	1% max	...	...	....	...	...	...	...

HASTELLOY® alloy X (HX)

USN N06002

Provides optimium balance of strength, oxidation resistance, welding characteristics and fabricability, at temperatures up to 2200° F. Particularly suitable in reducing and neutral atmospheres, and where ductility is required after prolonged service at elevated temperatures. Resists stress-corrosion cracking in petrochemical applications. Used in gas turbine engine combustors, heat treating equipment, flame holders, furnace baffles, and aircraft and marine applications.

Hastelloy® X Fact Sheet

Composition	[Ni 47.5%, Cr 21.8%, Fe 18.5%, Ni 9.0%]
Specifications	ASTM B572, AMS 5798, AWS A5.14
Density	0.297 lbs/in³
Tensile Strength	118 Kpsi*
Elongation	42%*
Melt	2470° F
Max. Operating Temperature	2200° F

* Tensile strength and elongation are for annealed 0.012″ wire diameter. Please note that material performance data is provided a reference guide only… There are many factors involved in wire cloth performance, so please consult with an experienced engineer before choosing the metal best suited for your unique needs!

Hastelloy is a registered trademark name of Haynes International, Inc.

INCOLOY® alloy 800

UNS N08811

Incoloy® 800 is a nickel – iron – chromium alloy with good strength and excellent resistance to oxidation and carburization in high temperature atmospheres up to 1100 degrees F. It also resists corrosion in many aqueous environments. The low carbon content helps prevent sensitization and consequent intergranular corrosion of weld heat-affected zones. Used for flue-gas scrubbers and for handling phosphoric and sulfuric acids.

Incoloy® 800 Fact Sheet

Composition	[Ni 32.5%, Cr 21.0%, C .10 Max, Fe Balance]
Specifications	ASTM B408
Density	0.288 lbs/in³
Tensile Strength	110 Kpsi*
Elongation	30%*
Melt	2500° F
Max. Operating Temperature	1900° F

* Tensile strength and elongation are for annealed 0.012″ wire diameter. Please note that material performance data is provided a reference guide only… There are many factors involved in wire cloth performance, so please consult with an experienced engineer before choosing the metal best suited for your unique needs!

Incoloy 800 In Stock

Mesh	Wire Diameter	Opening	Open Area	Roll Width	Price / Sq. Ft.*
5 x 5	0.041″	0.1590″	63.2%	37.38″	$28.24
6 x 6	0.035″	0.1317″	62.4%	58″, 5″	$33.81
8 x 8	0.035″	0.090″	51.8%	52″	$36.34
20 x 20	0.016″	0.340″	46.2%	43″	$50.69
40 x 40	0.010″	0.0150″	36.0%	45″, 5.5″	$26.72

* Price per square foot as well as availability are subject to change, additional changes may apply. There is a minimum order charge of $250.00 with a minimum line item charge of $125.00, smallest cut from a stock roll is 6″ x roll width.

Note that we weave wire mesh, so many other specs can be woven per request.

Incoloy is a registered trademark name of Inco Companies.

INCOLOY® alloy 800H & 800HT

USN N08810 & UNS N08811

The Incoloy 800H and 800HT nickel – iron – chromium alloys are the same basic alloys as Incoloy 800 but with significantly higher creep-rupture strength. This is achieved by close control of carbon, aluminum and titanium contents in conjunction with a high-temperature anneal. These alloys are used in chemical and petrochemical processing, in power plants, industrial furnaces and heat treating equipment.

Incoloy® 800H/HT Fact Sheet

Composition	[Fe 39.5% approx., Ni 30-35%, Cr 19-23%, C 0.06-0.1%]
Specifications	ASTM B408
Density	0.287 lbs/in³
Tensile Strength	110 Kpsi*
Elongation	32%*
Melt	2500° F
Max. Operating Temperature	1900° F

* Tensile strength and elongation are for annealed 0.012″ wire diameter. Please note that material performance data is provided a reference guide only… There are many factors involved in wire cloth performance, so please consult with an experienced engineer before choosing the metal best suited for your unique needs!

Incoloy 800H In Stock

Mesh	Wire Diameter	Opening	Open Area	Roll Width	Price / Sq. Ft.*
30 x 30	0.010″	0.0233″	48.9%	48″	$36.28

* Price per square foot as well as availability are subject to change, additional changes may apply. There is a minimum order charge of $250.00 with a minimum line item charge of $125.00, smallest cut from a stock roll is 6″ x roll width.

Note that we weave wire mesh, so many other specs can be woven per request.

Incoloy is a registered trademark name of Inco Companies.

INCONEL® alloy 600

UNS N06600

Ideal for use in high-temperature environments (up to 2150° F) that also pose the threat of oxidizing, reducing and corrosion. Offers superior resistance due to its high nickel and chromium content. Because of these properties, it is often specified for nuclear steam generator equipment, heat treating equipment and furnace muffles. Also used for electronic components and chemical and food processing. Inconel wire cloth is commonly used for heat treat fixtures, baskets and trays.

Inconel® 600 Fact Sheet

Composition	[Ni 72% min, Cr 14.0-17.0%, Fe 6.0-10.0%]
Specifications	ASTM B166, AMS 5687
Density	0.304 lbs/in³
Tensile Strength	110 Kpsi*
Elongation	30%*
Melt	2540° F
Max. Operating Temperature	2150° F

* Tensile strength and elongation are for annealed 0.012″ wire diameter. Please note that material performance data is provided a reference guide only… There are many factors involved in wire cloth performance, so please consult with an experienced engineer before choosing the metal best suited for your unique needs!

Inconel 600 commonly available items

Mesh	Wire Diameter	Opening	Open Area	Roll Width	Price / Sq. Ft.*
4 x 4	0.063″	0.1870″	56.0%	36″	$68.60
4 x 4	0.080″	0.1700″	46.2%	48″	$92.81
4 x 4	0.120″	0.1300″	27.0%	48″	$210.74
5 x 5	0.063″	0.1370″	46.9%	48″, 54″	$116.72
6 x 6	0.063″	0.1037″	38.7%	40″	$119.44
8 x 8	0.028″	0.097″	60.2%	36″, 60″	$39.88
8 x 8	0.032″	0.093″	55.4%	48″	$43.20
8 x 8	0.041″	0.084″	45.2%	48″	$80.01
8 x 8	0.047″	0.078″	38.9%	40″	$90.50
8 x 8	0.063″	0.062″	24.6%	48.75″	$141.88
10 x 10	0.025″	0.0750″	56.2%	61″	$32.16
12 x 12	0.025″	0.0583″	48.9%	49.50	$63.28
12 x 12	0.041″	0.0423″	25.8%	40.38″	$109.74
16 x 16	0.025″	0.0375″	36.0%	48″	$62.08
16 x 16	0.035″	0.0275″	19.4%	60.25″	$102.40
18 x 18	0.028″	0.0276″	24.7%	48″	$121.34
20 x 20	0.016″	0.0340″	46.2%	48″	$33.86
30 x 30	0.010″	0.0233″	48.9%	48″	$31.28
30 x 30	0.012″	0.0213″	40.8%	48″	$45.18
36 x 36AU	0.005″	Stranded Filter Cloth		41″	$174.38
40 x 40	0.010″	0.0150″	36.0%	36″, 72″	$31.20
50 x 50	0.009″	0.0110″	30.2%	48″	$64.06
60 x 60	0.0075″	0.0092″	30.5%	48″	$64.06
80 x 80	0.0055″	0.0070″	31.4%	48″	$83.54
100 x 100	0.0045″	0.0055″	30.2%	48″	$91.92

* Price per square foot as well as availability are subject to change, additional changes may apply. There is a minimum order charge of $250.00 with a minimum line item charge of $125.00, smallest cut from a stock roll is 6″ x roll width.

Note that we weave wire mesh, so many other specs can be woven per request.

People who view this page are often interested in Inconel 601 wire cloth as well.

Inconel is a registered trademark name of Inco Companies.

INCONEL® alloy 601

UNS N06601

With the addition of aluminum, Inconel 601 has outstanding resistance to oxidation and other forms of high temperature corrosion. It also has high mechanical properties at elevated temperatures. Used for industrial furnaces, heat-treating equipment such as baskets, muffles and retorts, petrochemical and other process equipment, and gas turbine components. Inconel wire cloth is commonly used for heat treat fixtures, baskets and trays.

Inconel® 601 Fact Sheet

Composition	[Ni 58.0-63.0%, Cr 21.0-25.0%, Al 1.0-1.7%, Fe rem]
Specifications	ASTM B166, AMS 5715
Density	0.293 lbs/in³
Tensile Strength	110 Kpsi*
Elongation	34%*
Melt	2494° F
Max. Operating Temperature	2100° F

* Tensile strength and elongation are for annealed 0.012″ wire diameter. Please note that material performance data is provided a reference guide only… There are many factors involved in wire cloth performance, so please consult with an experienced engineer before choosing the metal best suited for your unique needs!

Inconel 601 Commonly Available Items

Mesh	Wire Diameter	Opening	Open Area	Roll Width	Price / Sq. Ft.*
2 x 2	0.072″	0.4280″	73.3%	48″	$41.65
5 x 5	0.041″	0.1590″	63.2%	50.38″	$43.00
10 x 10	0.047″	0.0530″	28.1%	48.75″	$108.65
24 x 24	0.014″	0.0277″	44.2%	54″	$31.73
30 x 30 twilled	0.017″	0.163″	23.9%	48″	$55.16
30 x 32 twilled	0.014″	0.0193″ x 0.0173″	32.05%	48″	$23.90
35 x 35	0.014″	0.0146″	26.1%	48″	$45.69

* Price per square foot as well as availability are subject to change, additional changes may apply. There is a minimum order charge of $250.00 with a minimum line item charge of $125.00, smallest cut from a stock roll is 6″ x roll width. Twilled = Twilled weave.

Note that we weave wire mesh, so many other specs can be woven per request.

People who view this page are often interested in Inconel 600 wire cloth as well.

Inconel 601® is a registered trademark name of Inco Companies.

INCONEL® alloy 625

UNS N06625

Retains its strength and toughness across a wide range of operating temperatures, from cryogenic through 1800° F. This nickel – chromium – molybdenum alloy provides outstanding fatigue strength, good oxidation and corrosion resistance. Used in nuclear reactors, ash pit seals, marine equipment, fuel nozzles, afterburners, and chemical and pollution control equipment.

Inconel® 625 Fact Sheet

Composition	[Ni 61%, Cr 21.5%, Mo 9%, Nb+Ta 3.6%]
Specifications	ASTM B446, AMS 5837
Density	0.305 lbs/in³
Tensile Strength	155 Kpsi*
Elongation	35%*
Melt	2350° F
Max. Operating Temperature	2150° F

* Tensile strength and elongation are for annealed 0.012″ wire diameter. Please note that material performance data is provided a reference guide only… There are many factors involved in wire cloth performance, so please consult with an experienced engineer before choosing the metal best suited for your unique needs!

Inconel 625 mesh wire cloth commonly available

Mesh	Wire Diameter	Opening	Open Area	Roll Width	Price / Sq. Ft.*
30 x 28	0.0135″	0.0198″ x 0.0222″	36.97%	40.25″	$72.44
35 x 35	0.014″	0.0146″	26.1%	48″	$93.25

* Price per square foot as well as availability are subject to change, additional changes may apply. There is a minimum order charge of $250.00 with a minimum line item charge of $125.00, smallest cut from a stock roll is 6″ x roll width.

Note that we weave wire mesh, so many other specs can be woven per request.

Inconel is a registered trademark name of Inco Companies.

Nichrome V

UNS N06003

Also known as Nichrome 80-20, this nickel-chromium alloy it is well-suited for resistors at high operating temperatures. It has found wide application for resistances due to the combination of high electrical resistance and a low temperature coefficient of resistance. Nichrome V wire cloth is often seen in electric furnaces, radiant heaters, and other electrical industry applications.

Nichrome V Fact Sheet

Composition	[Ni rem(80%), Cr 19-21%, Fe 1% max, Mn 2.5% max]
Specifications	ASTM B344(withdrawn 2011)
Density	0.304 lbs/in³
Tensile Strength	115 Kpsi*
Elongation	30%*
Melt	2550° F
Max. Operating Temperature	2100° F

* Tensile strength and elongation are for annealed 0.012″ wire diameter. Please note that material performance data is provided a reference guide only… There are many factors involved in wire cloth performance, so please consult with an experienced engineer before choosing the metal best suited for your unique needs!

NiChrome V (80-20) wire mesh commonly available items

Mesh	Wire Diameter	Opening	Open Area	Roll Width	Price / Sq. Ft.*
3 x 3	0.105″	0.2283″	46.9%	—	made to order
6 x 6	0.047″	0.1197	51.2%	43″	$103.40
12 x 12	0.025″	0.0583″	48.9%	48″	$67.60
18 x 18	0.017″	0.0386″	48.3%	36″	$55.58

* Price per square foot as well as availability are subject to change, additional changes may apply. There is a minimum order charge of $250.00 with a minimum line item charge of $125.00, smallest cut from a stock roll is 6″ x roll width.

Note that we weave wire mesh, so many other specs can be woven per request.

People who view this page are often interested in Inconel 600 and Inconel 601 as well.

What We Make

WEAVE & CRIMP STYLES

RAW MATERIALS

CALCULATORS & MEASUREMENT TOOLS

Material Overview

Specification Charts

Composition	[Co rem(50%), Cr 19-21%, W 14-16%, Ni 9-11%, Fe 3%max, Mn 2%max]
Specifications	ASTM F90, AMS 5796
Density	0.330 lbs/in³
Tensile Strength	180 Kpsi*
Elongation	45%*
Melt	2425° F
Max. Operating Temperature	1800-2000° F

Composition	[Ni 57%(bal) Cr 20-24%, W 13-15%, Co max. 5%, Mo 1-3%, Mn 0.3-1%]
Specifications	AMS 5839
Density	0.324 lbs/in³
Tensile Strength	174000 psi*
Elongation	34%*
Melt	2400-2500° F
Max. Operating Temperature	2100° F

Composition	[Ni 38-46%, Cr 19.5-23.5%, Fe 22% min, Mo 2.5-3.5%, Cu 1.5-3%]
Specifications	ASTM B425
Density	0.294 lbs/in³
Tensile Strength	115 Kpsi*
Elongation	30%*
Melt	2525° F
Max. Operating Temperature	1900-2000° F

Composition	[Ni 44.5% min, Cr 20.0-24.0%, Co 10-15%, Mo 8-10%, Fe 3% max]
Specifications	ASTM B166
Density	0.302 lbs/in³
Tensile Strength	116 Kpsi*
Elongation	32%*
Melt	2500° F
Max. Operating Temperature	2150° F

Composition	[Ni 52.5%, Cr 19%, Fe 18.5%, Mo 3.0%, Nb+Ta 3.6%]
Specifications	ASTM B637
Density	0.296 lbs/in³
Tensile Strength	140 Kpsi*
Elongation	40%*
Melt	2400° F
Max. Operating Temperature	1800-2000° F

Composition	[Ni+Co 70% min, Cr 14-17%, Fe 5-9%, Ti 2.25-2.75%]
Specifications	ASTM B637, AWS A.5.14
Density	0.298 lbs/in³
Tensile Strength	125 Kpsi*
Elongation	40%*
Melt	2540° F
Max. Operating Temperature	1300° F

Composition	[Cr 22%, Al 4.8 %, Fe bal.]
Specifications	—
Density	0.262 lbs/in³
Tensile Strength	115 Kpsi*
Elongation	20%*
Melt	2730° F
Max. Operating Temperature	2370° F

Composition	[Ni 57% min, Cr 14-18%, Fe rem, Mn 1% max]
Specifications	ASTM B344(withdrawn 2011)
Density	— lbs/in³
Tensile Strength	— Kpsi*
Elongation	–%*
Melt	—-° F
Max. Operating Temperature	1950° F

Composition	[Ni 34-37% min, Cr 18-21%, Fe rem, Mn 1% max]
Specifications	ASTM B344(withdrawn 2011)
Density	— lbs/in³
Tensile Strength	— Kpsi*
Elongation	–%*
Melt	—-° F
Max. Operating Temperature	1900° F

Alloy / Number	Cr	Ni	C	Mn Max.	Si Max.	P Max.	S. Max.	Other Elements
304 Stainless Steel Mesh	18.0 – 20.0	8.0 – 11.0	0.08 Max	2.0	1.0	0.04	0.03	–
304L Stainless Steel Mesh	18.0 – 20.0	8.0 – 11.0	0.08 Max	2.0	1.0	0.04	0.03	–
309 Stainless Steel Mesh	18.0 – 20.0	8.0 – 11.0	0.08 Max	2.0	1.0	0.04	0.03	–
310 Stainless Steel Mesh	18.0 – 20.0	8.0 – 11.0	0.08 Max	2.0	1.0	0.04	0.03	–
314 Stainless Steel Mesh	18.0 – 20.0	8.0 – 11.0	0.08 Max	2.0	1.0	0.04	0.03	–
316 Stainless Steel Mesh	18.0 – 20.0	8.0 – 11.0	0.08 Max	2.0	1.0	0.04	0.03	–